IMPELLER MODELS

Hydrofoil

High efficiency with varying twist and width.
Ensures pure axial flow for maximum output.
Ideal for suspension, dissolution, blending, and dispersion.
Available in three and four-blade versions.
Saves 40% power compared to pitched blade turbines
Speed range: 80–500 rpm.
Dynamically balanced as needed.

4 Bladed Anchor with Wall Scraper

Operated close clearance with vessel wall or no clearance with wall scraper for promoting wall heat transfer in blending and heat transfer applications.
Used in laminar and turbulent flow conditions.
Also used in high viscous application with heat transfer by combining axial flow and high shear impellers.
Speed Range: 5 to 70 rpm

Pitched Blade Turbine

Axial flow impeller for Blending, Heat Transfer, Dispersion and Solid Suspension applications in turbulent flow ranges.
Available in Four and six bladed versions.
Multiple impellers are used in tall tanks.
Time tested.
Speed Range: Moderate

High-Shear-Saw-Cutter

Best in the Speed Range of 1500 to 5000 RPM in laminar to turbulent flow.
Creates very high shear for inducing inter molecular dispersion of immiscible fluids in emulsification and dispersion applications.
Most suited for batch application..

Stator-Rotor

This impeller is mainly used in emulsification, homogeneous mixing and size reduction process.
High shear type with stationary work-head and close clearance rotor operating at high speed.
Work heads are interchangeable.
Used in batch operations.

Helix

Designed with inner and outer flight for collinear counter-current pumping of materials of very viscous in nature ranging from 10000cp to 400000cp.
Also combined with high shear Disperser in non-newtonian Rheopectic rheology.
Effective even in low Reynolds number range.

Rushton Turbine

Best for Mass Transfer and Gassing applications in turbulent flow regime.
Most suited for gassing application when located above the gas sparger.
The central disc diverts the gas bubbles towards the high shear zone near the blade corners to ensure shearing of gas bubbles and dispersion in fluid medium. This way formation of blurbs and geysers are averted by proper sizing.
Also used in heat transfer applications. Consumes more power in un-gassed conditions, than in gassed ones.

Anchor With PBT

Contoured Radial impeller operated in close clearance to vessel wall or with wall wipers for convective heat transfer and blending applications.
Designed with two or four blades depending on the process requirement.
Changes in power response based on blade width, cross-arm and impeller H/D.
Combines with axial and radial flow impellers in low viscosity ranges.
Effective in viscosity range upto 50000ср.

RESPONSIBLE MIXING - SINCE 1990

CPT-Pravah Advantage

No worries from where your mixer is sourced. If you have any process or mechanical issue in your present Mixer, Call CEECONS PROCESS for survey and remedy.

CPT-Pravah Suraksha

With tremendous Confidence in our Customers and in our Design & Construction, we offer an UNCONDITIONAL 3 years Guarantee for Process and Mechanical performance of all our products.

CPT-Pravah Dream

Mixer Failure should never be a cause of process break-down or a Plant Shut-Down in any Process Industry.

CEECONS PROCESS TECHNOLOGIES

IMPELLER MODELS

Hydrofoil

High efficiency with varying twist and width.

Ensures pure axial flow for maximum output.

Ideal for suspension, dissolution, blending, and dispersion.

Available in three and four-blade versions.

Saves 40% power compared to pitched blade turbines

Speed range: 80–500 rpm.

Dynamically balanced as needed.

4 Bladed Anchor with Wall Scraper

Pitched Blade Turbine

Axial flow impeller for Blending, Heat Transfer, Dispersion and Solid Suspension applications in turbulent flow ranges.

Available in Four and six bladed versions.

Multiple impellers are used in tall tanks.

Time tested.

Speed Range: Moderate

High-Shear-Saw-Cutter

Best in the Speed Range of 1500 to 5000 RPM in laminar to turbulent flow.

Creates very high shear for inducing inter molecular dispersion of immiscible fluids in emulsification and dispersion applications.

Most suited for batch application..

Stator-Rotor

This impeller is mainly used in emulsification, homogeneous mixing and size reduction process.

High shear type with stationary work-head and close clearance rotor operating at high speed.

Work heads are interchangeable.

Used in batch operations.

Helix

Designed with inner and outer flight for collinear counter-current pumping of materials of very viscous in nature ranging from 10000cp to 400000cp.

Also combined with high shear Disperser in non-newtonian Rheopectic rheology.

Effective even in low Reynolds number range.

Rushton Turbine

Best for Mass Transfer and Gassing applications in turbulent flow regime.

Most suited for gassing application when located above the gas sparger.

The central disc diverts the gas bubbles towards the high shear zone near the blade corners to ensure shearing of gas bubbles and dispersion in fluid medium. This way formation of blurbs and geysers are averted by proper sizing.

Also used in heat transfer applications. Consumes more power in un-gassed conditions, than in gassed ones.

Anchor With PBT

Contoured Radial impeller operated in close clearance to vessel wall or with wall wipers for convective heat transfer and blending applications.

Designed with two or four blades depending on the process requirement.

Changes in power response based on blade width, cross-arm and impeller H/D.

Combines with axial and radial flow impellers in low viscosity ranges.

​Effective in viscosity range upto 50000ср.

RESPONSIBLE MIXING - SINCE 1990

CPT-Pravah Advantage

No worries from where your mixer is sourced. If you have any process or mechanical issue in your present Mixer, Call CEECONS PROCESS for survey and remedy.

CPT-Pravah Suraksha

With tremendous Confidence in our Customers and in our Design & Construction, we offer an UNCONDITIONAL 3 years Guarantee for Process and Mechanical performance of all our products.

CPT-Pravah Dream

Mixer Failure should never be a cause of process break-down or a Plant Shut-Down in any Process Industry.

TOP

Effective in viscosity range upto 50000ср.